CLI Reference Guide

SSH Commands 1639
Default Configuration
There is no default configuration for this command.
Command Mode
Global Configuration mode.
User Guidelines
This command has no user guidelines.
Example
console(config)#crypto key zeroize rsa
ip ssh port
Use the ip ssh port command in Global Configuration mode to specify the
TCP port to be used by the SSH server. To use the default port, use the no
form of this command.
Syntax
ip ssh port port-number
no ip ssh port
• port-number — Port number for use by the SSH server.
(Range: 1025–65535)
Default Configuration
The default value is 22.
Command Mode
Global Configuration mode
User Guidelines
The SSH TCP port should not be set to a value that might conflict with other
well-known protocol port numbers used on this switch.
2CSNXXX_SWUM200.book Page 1639 Tuesday, December 10, 2013 1:22 PM