CLI Reference Guide

SNMP Commands 1631
Example
The following example configures an SNMPv3 user "John" in group "user-
group".
console(config)# snmp-server user John user-group
snmp-server view
Use the snmp-server view command in Global Configuration mode to create
or update a Simple Network Management Protocol (SNMP) server view entry.
To delete a specified SNMP server view entry, use the no form of this
command.
Syntax
snmp-server view view-name oid-tree { included | excluded }
no snmp-server view
view-name [ oid-tree ]
• view-name — Specifies the label for the view record that is being created
or updated. The name is used to reference the record. (Range: 1-30
characters.)
•
oid-tree — Specifies the object identifier of the ASN.1 subtree to be
included or excluded from the view. To identify the subtree, specify a text
string consisting of numbers, such as
1.3.6.2.4 , or a word, such as
system . Replace a single subidentifier with the asterisk (*) wildcard to
specify a subtree family; for example
1.3.*.4 .
•
included — Indicates that the view type is included.
•
excluded — Indicates that the view type is excluded.
Default Configuration
A view entry does not exist.
Command Mode
Global Configuration mode
User Guidelines
This command can be entered multiple times for the same view record.
2CSNXXX_SWUM200.book Page 1631 Tuesday, December 10, 2013 1:22 PM