CLI Reference Guide

1620 SNMP Commands
Example
The following example maps a community access string dell_community to
group dell_group.
console(config)# snmp-server community-group dell_community dell_group
192.168.29.1
snmp-server contact
Use the snmp-server contact command in Global Configuration mode to set
up a system contact (sysContact) string. To remove the system contact
information, use the no form of the command.
Syntax
snmp-server contact text
no snmp-server contact
• text — Character string, 0 to 160 characters, describing the system contact
information.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays setting up the system contact point as
"Dell_Technical_Support".
console(config)# snmp-server contact Dell_Technical_Support
2CSNXXX_SWUM200.book Page 1620 Tuesday, December 10, 2013 1:22 PM