CLI Reference Guide

SNMP Commands 1609
76
SNMP Commands
Dell Networking N2000/N3000/N4000 Series Switches
The SNMP component provides a machine-to-machine interface for the Dell
Networking product family. This includes the ability to configure the network
device, view settings and statistics, and upload or download code or
configuration images. The agent includes a get-bulk command to reduce
network management traffic when retrieving a sequence of Management
Information Base (MIB) variables and an elaborate set of error codes for
improved reporting to the network control station. The extensible and
advanced design of the Dell Networking SNMP makes adding remote
manageability to networked devices undemanding. The agent allows a
network control station to retrieve reports from the networked device. These
reports are based upon the defined objects in the MIB. The agent queries,
reports, and sets MIB variables based upon directions from the network
control station or upon preset conditions.
Commands in this Chapter
This chapter explains the following commands:
show snmp snmp-server community-
group
snmp-server user
show snmp engineID snmp-server contact snmp-server view
show snmp filters snmp-server enable traps snmp-server v3-host
show snmp group snmp-server engineID local
–
show snmp user snmp-server filter –
show snmp views snmp-server group –
show trapflags snmp-server host –
snmp-server community snmp-server location –
2CSNXXX_SWUM200.book Page 1609 Tuesday, December 10, 2013 1:22 PM