CLI Reference Guide

1584 Serviceability Tracing Packet Commands
Default Configuration
Display of OSPFv3 traces is disabled by default.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#debug ospfv3 packet
debug ping
Use the debug ping command to enable tracing of ICMP echo requests and
responses. This command traces pings on the network port and on the
routing interfaces. Use the “no” form of this command to disable tracing of
ICMP echo requests and responses.
Syntax
debug ping packet
no debug ping packet
Default Configuration
Display of ICMP echo traces is disabled by default.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays.
console#debug ping packet
2CSNXXX_SWUM200.book Page 1584 Tuesday, December 10, 2013 1:22 PM