CLI Reference Guide

Serviceability Tracing Packet Commands 1571
Dot1ag CCM tracing enabled.
console#
console#no debug dot1ag ccm
Dot1ag CCM tracing disabled.
debug dot1x
Use the debug dot1x command to enable dot1x packet tracing. Use the “no”
form of this command to disable dot1x packet tracing.
Syntax
debug dot1x packet [ receive | transmit ]
no debug dot1x packet [ receive | transmit ]
Default Configuration
Display of dot1x traces is disabled by default.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#debug dot1x packet
debug igmpsnooping
Use the debug igmpsnooping to enable tracing of IGMP Snooping packets
transmitted and/or received by the switch. IGMP Snooping should be enabled
on the device and the interface in order to monitor packets for a particular
interface.
Syntax
debug igmpsnooping packet [ receive | transmit ]
2CSNXXX_SWUM200.book Page 1571 Tuesday, December 10, 2013 1:22 PM