CLI Reference Guide

Command Groups 154
Tunnel Interface
Virtual Router Redundancy
a. For the meaning of each Mode abbreviation, see Mode Types on page 87.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 87.
interface tunnel Enables the interface configuration mode for a
tunnel.
GC
show interfaces tunnel Displays the parameters related to tunnel such
as tunnel mode, tunnel source address and
tunnel destination address.
PE
tunnel destination Specifies the destination transport address of
the tunnel.
IC
tunnel mode ipv6ip Specifies the mode of the tunnel. IC
tunnel source Specifies the source transport address of the
tunnel, either explicitly or by reference to an
interface.
IC
Command Description Mode
a
ip vrrp Enables the administrative mode of Virtual
Router Redundancy Protocol (VRRP) for the
router.
GC
vrrp accept-mode Enables the VRRP Master to accept ping
packets sent to one of the virtual router’s IP
addresses.
IC
vrrp authentication Sets the authentication details value for the
virtual router configured on a specified
interface.
IC
vrrp description Assigns a description to the VRRP group. IC
vrrp ip Sets the virtual router IP address value for an
interface.
IC
2CSNXXX_SWUM200.book Page 154 Tuesday, December 10, 2013 1:22 PM