CLI Reference Guide

1474 Configuration and Image File Commands
Syntax
show startup-config
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the contents of the startup-config file.
console#show startup-config
!Current Configuration:
!System Description "Dell Networking 7048R, 10.0.0.0, Linux 6.6"
!System Software Version 6.0.0.0
!
configure
vlan routing 1 1
exit
slot 1/0 7 ! Dell Networking N3048
slot 1/1 11 ! SFP+ Card
slot 1/2 9 ! CX4 Card
stack
member 1 7 ! N3048
exit
logging console informational
logging cli-command
logging file informational
interface vlan 1
exit
snmp-server community "public" su
exit
write
Use the write command to copy the running configuration image to the
startup configuration.
2CSNXXX_SWUM200.book Page 1474 Tuesday, December 10, 2013 1:22 PM