CLI Reference Guide

1422 Captive Portal Commands
1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit - Level Disabled Blocked
console#show captive-portal configuration 1 interface 1/0/1
CP ID..................................... 1
CP Name................................... cp1
Interface................................. 1/0/1
Interface Description..................... Unit: 1 Slot: 0 Port: 1 Gigab...
Operational Status........................ Disabled
Disable Reason............................ Interface Not Attached
Block Status.............................. Not Blocked
Authenticated Users....................... 0
show captive-portal configuration locales
Use the show captive-portal configuration locales command to display
locales associated with a specific captive portal configuration.
Syntax
show captive-portal configuration cp-id locales
• cp-id —Captive Portal Configuration ID.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration 1 locales
Locale Code
---------------
en
2CSNXXX_SWUM200.book Page 1422 Tuesday, December 10, 2013 1:22 PM