CLI Reference Guide

1420 Captive Portal Commands
• timeout —Session timeout. 0 indicates use global configuration (Range:
0–86400 seconds).
Default Configuration
The global session timeout is used by default.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP)#user 1 session-timeout 86400
console(config-CP)#no user 1 session-timeout
Captive Portal Status Commands
show captive-portal configuration
Use the show captive-portal configuration command to display the
operational status of each captive portal configuration.
Syntax
show captive-portal configuration cp-id
• cp-id —Captive Portal ID.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
2CSNXXX_SWUM200.book Page 1420 Tuesday, December 10, 2013 1:22 PM