CLI Reference Guide

1416 Captive Portal Commands
Syntax
show captive-portal user [ user-id ]
• user-id —User ID (Range: 1–128).
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal user
Session
User ID User Name Timeout Group ID Group Name
------- --------------------- ------- ------------ ------------
1 user123 14400 1 Default
2 user234 0 1 Default
2 group2
console#show captive-portal user 1
User ID........................................ 1
User Name...................................... user123
Password Configured............................ Yes
Session Timeout................................ 0
Group ID Group Name
-------- --------------------------------
1 Default
2 group2
user group
Use the user group command to associate a group with a captive portal user.
Use the “no” form of this command to disassociate a group and user. A user
must be associated with at least one group so the last group cannot be
disassociated.
2CSNXXX_SWUM200.book Page 1416 Tuesday, December 10, 2013 1:22 PM