CLI Reference Guide

1410 Captive Portal Commands
Captive Portal Client Connection Commands
captive-portal client deauthenticate
Use the captive-portal client deauthenticate command to deauthenticate a
specific captive portal client.
Syntax
captive-portal client deauthenticate macaddr
• macaddr —Client MAC address.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#captive-portal client deauthenticate 0002.BC00.1290
show captive-portal client status
Use the show captive-portal client status command to display client
connection details or a connection summary for connected captive portal
users.
Syntax
show captive-portal client [ macaddr ] status
• macaddr —Client MAC address.
Default Configuration
There is no default configuration for this command.
2CSNXXX_SWUM200.book Page 1410 Tuesday, December 10, 2013 1:22 PM