CLI Reference Guide

1408 Captive Portal Commands
Syntax
redirect-url url
• url —The URL for redirection (Range: 1–512 characters).
Default Configuration
There is no redirect URL configured by default.
Command Mode
Captive Portal Instance mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP 2)#redirect-url www.dell.com
session-timeout
Use the session-timeout command to configure the session timeout for a
captive portal configuration. Use the no form of this command to reset the
session timeout to the default.
Syntax
session-timeout timeout
no session-timeout
• timeout —Session timeout. 0 indicates timeout not enforced (Range:
0–86400 seconds).
Default Configuration
There is no session timeout by default.
Command Mode
Captive Portal Instance mode.
2CSNXXX_SWUM200.book Page 1408 Tuesday, December 10, 2013 1:22 PM