CLI Reference Guide

Command Groups 140
Loopback Interface
show ipv6 mld groups Displays information about multicast groups
that MLD reported.
PE
show ipv6 mld interface Displays MLD related information for an
interface.
PE
show ipv6 mld host-proxy Displays a summary of the host interface
status parameters.
PE
show ipv6 mld host-proxy
groups
Displays information about multicast groups
that the MLD Proxy reported.
PE
show ipv6 mld host-proxy
groups detail
Displays information about multicast groups
that MLD Proxy reported.
PE
show ipv6 mld host-proxy
interface
Displays a detailed list of the host interface
status parameters.
PE
show ipv6 mld traffic Displays MLD statistical information for the
router.
PE
show ipv6 neighbors Displays information about IPv6 neighbors. PE
show ipv6 route Displays the IPv6 routing table. PE
show ipv6 route
preferences
Shows the preference value associated with
the type of route.
PE
show ipv6 route summary Displays a summary of the routing table. PE
show ipv6 traffic Shows traffic and statistics for IPv6 and
ICMPv6.
UE
show ipv6 vlan Displays IPv6 VLAN routing interface
addresses.
PE
traceroute ipv6 Discovers the routes that packets actually
take when traveling to their destination
through the network on a hop-by-hop basis.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 87.
Command Description Mode
a
interface loopback Enters the Interface Loopback configuration
mode.
GC
Command Description Mode
a
2CSNXXX_SWUM200.book Page 140 Tuesday, December 10, 2013 1:22 PM