CLI Reference Guide

1392 Auto-Install Commands
Command Mode
Global Configuration.
User Guidelines
This command has no user guidelines
Example
console#
console#configure
console(config)#boot host dhcp
console(config)#no boot host dhcp
boot host retrycount
The boot host retrycount command sets the number of attempts to
download a configuration. Use the no form of this command to reset the
number of attempts to download a configuration to the default.
Syntax
boot host retrycount count
no boot host retrycount
• count — The number of attempts to download a configuration (Range:
1–6).
Default Configuration
The default number of configuration download attempts is three.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines
Example
console#
console#configure
console(config)#boot host retrycount 5
2CSNXXX_SWUM200.book Page 1392 Tuesday, December 10, 2013 1:22 PM