CLI Reference Guide

Virtual Router Redundancy Protocol Commands 1381
Example
The following example displays all configuration information about the
virtual router on the selected interface.
console#show vrrp interface brief
Interface VRID IP Address Mode State
--------- ---- -------------- ------ ------------
vlan1 2 0.0.0.0 Disable Initialize
vlan2 5 192.168.5.55 Enable Initialize
show vrrp interface stats
Use the show vrrp interface stats command in User EXEC mode to display
the statistical information about each virtual router configured on the switch.
Syntax
show vrrp interface stats vlan vlan-id vr-id
• vlan-id — Valid VLAN ID.
•
vr-id — The virtual router identifier. (Range: 1-255)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays all statistical information about the VLAN 15
virtual router.
console#show vrrp interface stats vlan 15 5
UpTime..................... 0 days 0 hrs 0 mins 0 secs
Protocol....................................... IP
State Transitioned to Master................... 0
Advertisement Received......................... 0
Advertisement Interval Errors.................. 0
2CSNXXX_SWUM200.book Page 1381 Tuesday, December 10, 2013 1:22 PM