CLI Reference Guide

1378 Virtual Router Redundancy Protocol Commands
Track Interface State ......................... Down
Track Interface DecrementPriority ............. 20
Track Route (pfx/len) ......................... 10.10.10.0/24
Track Route Reachable ......................... False
Track Route DecrementPriority ................. 20
Vlan 7 – Group 2
Primary IP Address............................. 192.168.5.65
VMAC Address................................... 0000.5E00.0202
Authentication Type............................ None
Priority....................................... 60
Configured Priority............................ 100
Advertisement Interval (secs).................. 10
Accept Mode ................................... Enable
Pre-empt Mode.................................. Enable
Pre-empt Delay................................. 0
Administrative Mode............................ Enable
State.......................................... Initialized
Timers Learn Mode............................ Disable
Description .....................................
Track Interface................................ vlan 3
Track Interface State ......................... Down
Track Interface DecrementPriority ............. 20
Track Route (pfx/len) ......................... 10.10.10.0/24
Track Route Reachable ......................... False
Track Route DecrementPriority ................. 20
console#show vrrp brief
Interface Grp Prio IP Address Mode State
--------- --- ---- -------------- ------ ------------
V1 1 2 60 0.0.0.0 Disable Initialize
V1 2 5 70 192.168.5.55 Enable Initialize
show vrrp interface
Use the show vrrp interface command in User EXEC or Privileged EXEC
mode to display all configuration information and VRRP router statistics of a
virtual router configured on a specific interface.
Syntax
show vrrp interface [brief | vlan vlan-id {stats}]
• brief — Display summary information about each virtual router configured on
the switch.
2CSNXXX_SWUM200.book Page 1378 Tuesday, December 10, 2013 1:22 PM