CLI Reference Guide

OSPFv3 Commands 1325
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays brief ospf interface information.
console#show ipv6 ospf interface brief
Hello Dead Retrax LSA
Admin Router Int. Int. Int. Retrax Ack
Interface Mode Area ID Prior. Cost Val. Val. Val. Delay Intval
--------- -------- -------- ------ ----- ----- ----- ------ ------ -----
show ipv6 ospf interface stats
Use the show ipv6 ospf interface stats command in User EXEC mode to
display the statistics for a specific interface. The command only displays
information if OSPF is enabled.
Syntax
show ipv6 ospf interface stats vlan vlan-id
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
2CSNXXX_SWUM200.book Page 1325 Tuesday, December 10, 2013 1:22 PM