CLI Reference Guide

OSPF Commands 1269
00:05:15 0 10 0 10 0 R, N, SN
00:05:11 0 0 0 0 0 R
00:04:50 0 60 0 60 460 R, N
00:04:46 0 90 0 100 60 R, N
00:03:42 0 70 10 90 160 R
00:03:39 0 70 40 120 240 X
00:03:36 0 60 60 130 160 X
00:01:28 0 60 50 130 240 X
00:01:25 0 30 50 110 310 SN
00:01:22 0 0 40 50 260 SN
00:01:19 0 0 20 20 190 X
00:01:16 0 0 0 0 110 R, X
show ip ospf stub table
Use the show ip ospf stub table command in Privileged EXEC mode to
display the OSPF stub table. The information below will only be displayed if
OSPF is initialized on the switch.
Syntax
show ip ospf stub table
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the OSPF stub table.
console(config)#show ip ospf stub table
AreaId TypeofService Metric Val Import SummaryLSA
------------- ------------- ---------- -----------------
0.0.0.1 Normal 1 Enable
2CSNXXX_SWUM200.book Page 1269 Tuesday, December 10, 2013 1:22 PM