CLI Reference Guide

OSPF Commands 1261
LSA Ack Interval..................... 1
Transmit Delay....................... 1
Authentication Type.................. None
Metric Cost.......................... 100 (computed)
Passive Status....................... Non-passive interface
OSPF Mtu-ignore...................... Disable
Flood Blocking....................... Disable
State................................ point-to-point
Number of Link Events................ 1
Local Link LSAs...................... 0
Local Link LSA Checksum.............. 0
show ip ospf interface brief
Use the show ip ospf interface brief command in Privileged EXEC mode to
display brief information for the IFO object or virtual interface tables.
Syntax
show ip ospf interface brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays brief information for the IFO object or virtual
interface tables.
console#show ip ospf interface brief
Hello Dead Retrax LSA
Admin Router Int. Int. Int. Tranx Ack
Interface Mode Area ID Prior. Cost Val. Val. Val. Delay Intval
------------ -------- ----------- ------ ----- ----- ----- ------ ------ ------
Vl10 Enable 0.0.0.10 1 10 10 40 5 1 1
Vl20 Enable 0.0.0.1 1 10 10 40 5 1 1
Vl100 Enable 0.0.0.111 1 10 10 40 5 1 1
loopback 1 Enable 0.0.0.0 1 1 10 40 5 1 1
2CSNXXX_SWUM200.book Page 1261 Tuesday, December 10, 2013 1:22 PM