CLI Reference Guide

Command Groups 126
dot1x timeout server-
timeout
Sets the number of seconds the switch waits for
a response from the authentication server
before resending the request.
IC
dot1x timeout tx-period Sets the number of seconds the switch waits for
a response to an EAP-request/identify frame
from the client before resending the request.
IC
authentication enable Enables the Authentication Manager. GC
authentication order Sets the order of authentication methods used
on a port
IC
authentication priority Sets the priority for the authentication methods
used on a port
IC
authentication restart Sets the interval after which reauthentication
starts.
IC
clear authentication
statistics
Clears the authentication statistics. PE
clear authentication
authentication-history
Clears the authentication history logs. PE
show authentication Displays the configured authentication
methods configured and if Tiered
Authentication is enabled.
PE
show authenticaton
authentication-history
Displays the authentication history on one or
more interfaces.
PE
show authentication
statistics
Displays the Authentication Manager statistics. PE
show dot1x Displays 802.1X status for the switch or the
specified interface.
PE
show dot1x authentication-
history
Displays the dot1x authentication events and
information during successful and unsuccessful
dot1x authentication processes.
PE
show dot1x clients Displays detailed information about the users
who have successfully authenticated on the
system or on a specified port.
PE
show dot1x interface Shows the status of MAC Authentication
Bypass.
PE
Command Description Mode
a
2CSNXXX_SWUM200.book Page 126 Tuesday, December 10, 2013 1:22 PM