CLI Reference Guide

OSPF Commands 1259
Summary ASBR................................... 0
Type-7 Ext..................................... 0
Self Originated Type-7......................... 0
Opaque Link.................................... 0
Opaque Area.................................... 0
Subtotal....................................... 0
Router database summary
Router......................................... 0
Network........................................ 0
Summary Net.................................... 0
Summary ASBR................................... 0
Type-7 Ext..................................... 0
Opaque Link.................................... 0
Opaque Area.................................... 0
Type-5 Ext..................................... 0
Self-Originated Type-5 Ext..................... 0
Opaque AS...................................... 0
Total.......................................... 0
show ip ospf interface
Use the show ip ospf interface command in Privileged EXEC mode to display
the information for the VLAN or loopback interface. The long form of the
command displays the configuration of flood blocking.
Syntax
show ip ospf interface [ interface-type interface-number ]
• interface-type —Vlan or loopback
•
interface-number —Valid VLAN ID or loopback interface number (Range:
0–7).
•
Flood Blocking —Indicates if flood blocking is enabled or disabled.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes, Configuration mode and all
Configuration submodes
2CSNXXX_SWUM200.book Page 1259 Tuesday, December 10, 2013 1:22 PM