Manualshelf

CLI Reference Guide

ManualsBrandsDell ManualsserversDell Dell Networking N2000 Series
1181118211831184118511861187118811891190
IPv6 Multicast Commands 1187
Syntax
show ipv6 pim rp mapping [
rp-address
|
candidate
|
static
]
•
rp-address
—IP address of RP.
• candidate—Show candidate rendezvous point mappings.
• static—Show static rendezvous point mappings.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pim rp mapping
Group Address.................................. FF1E::/64
RP Address..................................... 2001::1
origin......................................... Static
Group Address.................................. FF1E::/64
RP Address..................................... 3001::1
origin......................................... BSR
2CSNXXX_SWUM200.book Page 1187 Tuesday, December 10, 2013 1:22 PM