CLI Reference Guide

Command Groups 118
priority Specifies the order in which the servers are to be
used, with 0 being the highest priority.
R
radius-server attribute 4 Sets the network access server (NAS) IP address
for the RADIUS server.
GC
radius-server deadtime Improves RADIUS response times when servers
are unavailable. Causes the unavailable servers
to be skipped.
GC
radius-server host Specifies a RADIUS server host. GC
radius-server key Sets the authentication and encryption key for
all RADIUS communications between the
switch and the RADIUS daemon.
GC
radius-server key encrypted Sets the authentication and encryption key for
communication between the switch and
RADIUS server.
GC
radius-server retransmit Specifies the number of times the software
searches the list of RADIUS server hosts.
GC
radius-server source-ip Specifies the source IP address used for
communication with RADIUS servers.
GC
radius-server timeout Sets the interval for which a switch waits for a
server host to reply.
GC
retransmit Specifies the number of times the software
searches the list of RADIUS server hosts before
stopping the search.
R
show aaa servers Displays the list of configured RADIUS servers
and the values configured for the global
parameters of the RADIUS client.
UE or
PE
show accounting methods Displays the configured accounting method
lists.
PE
show radius statistics Shows the statistics for an authentication or
accounting server.
UE or
PE
source-ip Specifies the source IP address to be used for
communication with RADIUS servers.
R
timeout Sets the timeout value in seconds for the
designated radius server.
R
Command Description Mode
a
2CSNXXX_SWUM200.book Page 118 Tuesday, December 10, 2013 1:22 PM