CLI Reference Guide

Command Groups 117
Radius
traffic-shape Specifies the maximum transmission
bandwidth limit for the interface as a whole.
GC or
IC
vlan priority Assigns a default VLAN priority tag for
untagged frames ingressing an interface.
IC
a. For the meaning of each Mode abbreviation, see Mode Types on page 87.
Command Description Mode
a
aaa accounting dot1x
default start-stop
Creates an accounting method list GC
accounting
Applies an accounting method to a line
config.
LC
acct-port Sets the port that connects to the RADIUS
accounting server.
R
auth-port Sets the port number for authentication requests
of the designated radius server
.
R
deadtime Improves Radius response times when a server is
unavailable by causing the unavailable server to
be skipped.
R
debug aaa accounting
Enables debugging for accounting.
PE
key Sets the authentication and encryption key for all
RADIUS communications between the switch
and the RADIUS daemon .
R
key Configures an encrypted key that is shared with
the RADIUS server.
R
msgauth Enables the message authenticator attribute to
be used for the RADIUS Authenticating server
being configured.
R
name (RADIUS server) Assigns a name to a RADIUS server. R
primary Specifies that a configured server should be the
primary server in the group of authentication
servers which have the same server name.
R
Command Description Mode
a
2CSNXXX_SWUM200.book Page 117 Tuesday, December 10, 2013 1:22 PM