CLI Reference Guide
1164 Multicast Commands
Example
console#show ip pim rp mapping candidate
RP Address.................................... 192.168.10.1
Group Address.............................. 224.1.2.1
Group Mask................................. 255.255.0.0
Origin..................................... BSR
C-RP Advertisement Interval (secs)......... 60
Next Candidate RP Advertisement (hh:mm:ss). 00:00:15
If no RP Group mapping exists on the router, the following message is
displayed:
No RP-Group mappings exist on this router.
If no static RP Group mapping exists on the router, the following message is
displayed:
No Static RP-Group mappings exist on this router.
Field Description
RP Address Address of the RP
Group Address Address of the multicast group.
Group Mask Mask for the group address.
Origin Origin from where this group mapping is learned.
2CSNXXX_SWUM200.book Page 1164 Tuesday, December 10, 2013 1:22 PM










