CLI Reference Guide

1160 Multicast Commands
• vlan-id — A valid VLAN ID for which multicast routing has been enabled.
Field Descriptions
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC and Privileged EXEC modes, Configuration mode and all
Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
(console) #show ip pim interface
InterfaceVLAN0010
ModeSparse
Hello Interval (secs)30
Join Prune Interval (secs)60
DR Priority1
BSR BorderDisabled
Neighbor Count1
Designated Router192.168.10.1
InterfaceVLAN0001
Field Description
Mode Active PIM Protocol
Interface Interface number
Hello Interval Hello interval value
Join-prune Interval Join-prune interval value
DR Priority DR Priority configured on this interface
BSR Border Whether or not this interface is configured as a BSR Border
Neighbor Count Number of PIM Neighbors learnt on this interface
Designated-Router IP address of the elected DR on the interface
2CSNXXX_SWUM200.book Page 1160 Tuesday, December 10, 2013 1:22 PM