CLI Reference Guide

1152 Multicast Commands
• group-address —An IP multicast group address.
• group-mask—An IPv4 mask in a.b.c.d form where a, b, c and d range from
0-255.
Default Configuration
There are no group addresses configured by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip pim ssm 239.0.10.0 255.255.255.0
show ip multicast
Use the show ip multicast command in Privileged EXEC mode to display the
system-wide multicast information.
Syntax
show ip multicast
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes, Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
2CSNXXX_SWUM200.book Page 1152 Tuesday, December 10, 2013 1:22 PM