CLI Reference Guide

IPv6 Routing Commands 1113
Version1 Host Timer............................ -----
Group compat mode.............................. v2
Source Address ExpiryTime
----------------- -----------
4001::6 00:03:15
4001::7 00:03:15
4001::8 00:03:15
console#show ipv6 mld groups vlan 6
Group Address................................ FF1E::1
Interface..................................... vlan 6
Up Time (hh:mm:ss).......................... 00:04:23
Expiry Time (hh:mm:ss)........................ ------
Group Address................................ FF1E::2
Interface..................................... vlan 6
Up Time (hh:mm:ss).......................... 00:04:23
Expiry Time (hh:mm:ss)........................ ------
Group Address................................ FF1E::3
Interface..................................... vlan 6
Up Time (hh:mm:ss).......................... 00:04:23
Expiry Time (hh:mm:ss)........................ ------
Group Address................................ FF1E::4
Interface..................................... vlan 6
Up Time (hh:mm:ss).......................... 00:04:23
Expiry Time (hh:mm:ss)........................ ------
show ipv6 mld host-proxy
Use the show ipv6 mld host-proxy command to display a summary of the host
interface status parameters.
This command deprecates the show ipv6 mld mroute-proxy command.
Syntax
show ipv6 mld host-proxy
Default Configuration
There is no default configuration for this command.
2CSNXXX_SWUM200.book Page 1113 Tuesday, December 10, 2013 1:22 PM