CLI Reference Guide

Command Groups 109
MLAG
lldp transmit-tlv Specifies which optional TLVs in the 802.1AB
basic management set will be transmitted in the
LLDPDUs.
IC
show lldp Displays the current LLDP configuration
summary.
PE
show lldp interface Displays the current LLDP interface state. PE
show lldp local-device Displays the LLDP local data. PE
show lldp med Displays a summary of the current LLDP MED
configuration.
PE
show lldp med interface Displays a summary of the current LLDP MED
configuration for a specific interface.
PE
show lldp med local-device
detail
Displays the advertised LLDP local data in
detail.
PE
show lldp med remote-
device
Displays the current LLDP MED remote data. PE
show lldp remote-device Displays the current LLDP remote data. PE
show lldp statistics Displays the current LLDP traffic statistics. PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 87.
Command Description Mode
a
clear vpc statistics Clears the counters for the keepalive
messages transmitted and received by the
MLAG switch.
PE
debug vpc Enables debug traces for the specified
protocols.
GC
feature vpc Globally enables MLAG. GC
peer-detection enable
Enables the Dual Control Plane
Detection Protocol.
MD
Command Description Mode
a
2CSNXXX_SWUM200.book Page 109 Tuesday, December 10, 2013 1:22 PM