CLI Reference Guide

1082 IPv6 Routing Commands
clear ipv6 neighbors
Use the clear ipv6 neighbors command in Privileged EXEC mode to clear all
entries in the IPv6 neighbor table or an entry on a specific interface.
Syntax
clear ipv6 neighbors [vlan vlan-id ]
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
ipv6 host ipv6 nd prefix show ipv6 brief show ipv6 route
ipv6 mld last-
member-query-
count
ipv6 nd ra-interval show ipv6 interface show ipv6 route
preferences
ipv6 mld last-
member-query-
interval
ipv6 nd ra-lifetime show ipv6 interface
management
statistics
show ipv6 route
summary
ipv6 mld host-proxy ipv6 nd reachable-
time
show ipv6 mld
groups
show ipv6 traffic
ipv6 mld host-proxy
reset-status
ipv6 nd suppress-ra show ipv6 mld
interface
show ipv6 vlan
ipv6 mld host-proxy
unsolicit-rprt-
interval
ipv6 route show ipv6 mld host-
proxy
traceroute ipv6
ipv6 mld query-
interval
–––
2CSNXXX_SWUM200.book Page 1082 Tuesday, December 10, 2013 1:22 PM