CLI Reference Guide

1066 IP Routing Commands
Syntax
show ip policy map-name
• map-name —The name of a specific route map.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
console#show ip policy
Interface Route map
Gi1/0/24 pbr-rmap
show ip protocols
Use the show ip protocols command in Privileged EXEC mode to display a
summary of the configuration and status for each unicast routing protocol.
The command lists all supported routing protocols, regardless of whether they
are currently configured or enabled.
Syntax
show ip protocols
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
2CSNXXX_SWUM200.book Page 1066 Tuesday, December 10, 2013 1:22 PM