Practices Guide

LC Integration Best Practices Specification

113

A) The Lifecycle Controller remote service must be in a “ready” state before executing any

other WSMAN commands. The GetRSStatus() method or the GetRemoteServicesAPIStatus()

method may be used depending on the version of the LC Management registered profile.

B) GetMemoryView(): GET the DCIM_MemoryView instance using the InstanceID=

DIMM.Socket.A1. See Section 2.3 for a definition of GET.

The instance of DCIM_MemoryView that contains the information on the first memory DIMM will

be returned.

22 PCI Device Profile Use Cases

22.1 Discovery of PCI Device profile support

Use the following procedure below to confirm the existence of PCI Device profile support.

Applies to: LC1.5.0+

Prerequisites for script: none

Script: GetPCIDeviceProfile.win

A) The Lifecycle Controller remote service must be in a “ready” state before executing any

other WSMAN commands. The GetRSStatus() method or the GetRemoteServicesAPIStatus()

method may be used depending on the version of the LC Management registered profile.

B) GetLCRegisteredProfiles(): ENUMERATE the DCIM_LCRegisteredProfile class to view all

registered profiles. See section 2.2 for a definition of ENUMERATE .

C) Search for “RegisteredName=PCI Device” and note its instanceID to use in step D)

D) GetLCRegisteredProfile(): GET the DCIM_LCRegisteredProfile instance using the

InstanceID from C). See Section 2.3 for a definition of GET.

Results for the InstanceID of DCIM:PCIDevice:1.0.0 shown below. If no instance is returned, the

profile is not supported.

NOTE: 12G example output shown below

DCIM_LCRegisteredProfile

AdvertiseTypeDescriptions = WS-Identify

AdvertiseTypeDescriptions = Interop Namespace

AdvertiseTypes = 1

InstanceID = DCIM:PCIDevice:1.0.0

OtherRegisteredOrganization = DCIM

ProfileRequireLicense = Remote Inventory

ProfileRequireLicenseStatus = LICENSED

RegisteredName = PCI Device

RegisteredOrganization = 1

RegisteredVersion = 1.0.0