White Paper

8 Dell Power Edge M1000e Chassis Management Controller Version 4.5 - Extended Power Performance Using 3000W
AC PSU
2 Managing EPP features on CMC interfaces
This feature can be managed through the CMC Web interface and RACADM interface.
The CMC Web interface supports the EPP feature for the following:
• EPP"feature"control,"(Enable/Disable)"using"Chassis Power Configuration"page.
• EPP"Status"using"Chassis Home Page
• EPP"Power"Monitoring"and"Statistics
• EPP"status"updates"captured"in"CMC"Log
CMC RACADM CLI Interface support shall be available for the following:
• EPP"feature"control"(Enable/Disable)"using"racadm getconfig/config
• EPP"status"using"racadm getpbinfo
• Error"Reporting"using"racadm getpbinfo
• EPP"status"updates"captured"in"RAC"Log
2.1 Managing EPP feature using the Web Interface:
The following sections describe how to manage the EPP feature on the CMC Web Interface.
2.1.1 EPP Configuration and Control
The Power Configuration page on the Web interface allows a user to enable or disable the EPP feature
using the check box. Configurations consisting of six 3000W AC PSUs are shipped from the factory with
the EPP feature enabled, as factory default.