White Paper

18 Dell Power Edge M1000e Chassis Management Controller Version 4.5 - Extended Power Performance Using 3000W
AC PSU
Figure 13 Warning Message when user tries to Enabled MPCM while EPP is Enabled (active).
3.5 EPP and Redundancy Policy
“Power Supply Redundancy” and “No Redundancy” are not compatible with EPP. Modification of the
Redundancy Policy from “Grid Redundancy” (factory shipped default setting), to “Power Supply
Redundancy” or “No Redundancy” on EPP Enabled configuration is not possible. The incompatible options
are grayed out on the Web interface as illustrated in Figure 12.