White Paper

14 Dell Power Edge M1000e Chassis Management Controller Version 4.5 - Extended Power Performance Using 3000W
AC PSU
EPP Disabled:
Figure 11 When EPP is disabled.
To view the EPP feature control related logs from CMC Web Interface, go to Logs and CMC logs:
Figure 12 EPP Log Messages on CMC Web Interface.
2.2 Managing EPP feature using RACADM interface:
The following sections describe how to manage the EPP feature using the RACADM interface.
2.2.1 EPP Configuration and Control
You can enable or disable the EPP feature using the RACADM interface on the chassis with 3000W AC
PSU configuration using the following commands:
• To"Enable"EPP:
$ racadm config -g cfgChassisPower -o cfgChassisEPPEnable 1
Object value modified successfully
• To"Disable"EPP:"
$ racadm config -g cfgChassisPower -o cfgChassisEPPEnable 0
Object value modified successfully
2.2.2 EPP Status Verification
You can verify if the EPP feature is enabled or disabled on a chassis with 3000W AC PSU configuration
using the following RACADM commands::
• Execute"following"command""to"check"EPP"status:
$ racadm getconfig -g cfgChassisPower -o cfgChassisEPPEnable
1 = EPP is Enabled