Manualshelf

User's Manual

ManualsBrandsDell ManualsSoftwareDell Dell Active System Manager Version 7.0
221222223224225226227228229230
Working with Templates
8-22 Active System Manager User Guide, Release 7.0
13. Click Finish to confirm your session.
A prompt displays, confirming your scheduled session. The prompt asks if you would like to switch to
the Sessions perspective to view your sessions.
14. Click the Remember my decision check box to allow the software to always switch to the Session
Perspective view after scheduling all future sessions.
Note This message displays if you are not in the Sessions perspective. If you have clicked
the check box, the message does not appear on subsequent session scheduling.
15. Click Ye
s to automatically switch to the Sessions perspective, or click No to remain in your current
perspective.
Your newly created session will display in the Sessions view. For more information about the Sessions
view
, see Chapter 9, “Session Management.”
Archiving Templates Using the Templates View
Typically you may want to archive older Templates, depending on the archive rules defined by your Active
System Manager administrator.
Note You retain the ability to search such Templates within the Archive Bin.
To archive Templates using the Templates view, perform the following steps:
1. Open the Templates view: on the Active System Manager menu bar, click Window > Show View >
Templates > OK.
2. In the Templates view, right-click a Template, and select Move to Archive Bin.
When the Confirm Archiving Operation dialog box displays, click OK.
Restoring Archived Templates
You can restore Templates previously archived to the Template Archive Bin. To restore a Template to your
Active System Manager workbench, perform the following steps:
1. Open the Template Archive Bin view: on the Active System Manager menu bar, click Window > Show
View > Other > Active System Manager > Template Archive Bin > OK.
2. Select the associated Template and perform one of the following options:
• Drag it to the desired location in the Templates view.
• Right-click in the view and select Restore. When prompted to confirm the Restore operation, click
OK.