Specifications

Dell Latitude E6420 XFR Setup and Features Information

eGalaxTouch Conﬁguration Utility | Page 17

Setting

e Setting property page provides the following buttons and check boxes:

1 Beep

• Beep On Touch

Check this check box to enable driver to generate a beep sound when touch

touchscreen state is switched from untouched to touched state.

• Beep On Release

Check this check box to enable driver to generate a beep sound when touchscreen state

is switched from touched state to untouch state.

• Frequency

Adjust this frequency to control the beep sound frequency generated by the driver.

• Duration

Adjust this duration to control the beep sound duration.

2 Linearization Style

e eGalaxTouch utility provides you with both 9 points and 25 points calibration for

linearization. You can select the suitable kind of linearization type with this setting. e

Linearization function is accessed under the “Tools” tab.

3 Double Click Time

e double Click Time group is used to set system double click time. Changing this value

will aect the double click behavior for all of the mice devices in the system. Two continuous

clicks at the same area within this specied time period will be recognized as a double click

event.

4 Double Click Area

e double click area group is used to set the system double click area. Changing this value

will aect the double click behavior for all of the mice devices in the system. Two continuous

clicks within the specied area in the specied double click time will be recognized as a

double click event.

5 Mouse Emulation mode

ere are 5 mouse emulation modes for the eGalaxTouch touch screen controllers. Press on

the button to change the emulation mode.

• Normal Mode

You can select this mode to select objects, and drag objects.

• Click On Touch

With this Click On Touch mode, the driver emulates a mouse click event when the

touch screen state is switched from un-touched state to touched state. en, the driver

always generates a mouse move event and tracks the touch position until the touch

screen state switches to the un-touch state.

• Click On Release

With this Click On Release mode, the driver emulates a mouse click event when the

touch screen state is switched from touched state to un-touched state.