User`s guide

WebBIOS Configuration Utility 3

Starting the WebBIOS Utility

When the host computer boots, hold the <Ctrl> key and press the <H>

key when the following text appears:

Press <Ctrl><M> to Run Configuration Utility

Or press <Ctrl><H> for WebBIOS

After you press <Ctrl><H>, the Adapter Selection screen displays. You

use this screen to select the adapter that you want to configure. Select an

adapter and press Start to begin the configuration. If you want to use the

BIOS Configuration Utility instead of WebBIOS, click the Control-M

button.

Adapter Selection Screen