User`s guide

WebBIOS Configuration Utility 19
Array Definition
The Array Definition screen displays next. To add drives to an array, press
and hold the Ctrl key while you select "ready" drives on the left side of the
screen. Click Accept Array to add the drives. To undo the changes, press
Reclaim. Click Next to go to Step 4/5. The Array Definition screen shows
an example of an array being added.
Array Definition Screen
In the Arrays window, on the right side of the screen, the Array heading
displays the amount of space available on the hard drives, depending on the
RAID level selected. For example, Array 0 has a capacity of 17136 MB as
RAID 0 (striping), and 8568 MB as RAID 1 (mirroring.) RAID 0 offers the
combined capacity of both drives. RAID 1 offers half the capacity of the two
drives (or the capacity of the smaller of two drives, if they are not the same
size.)