User`s guide

WebBIOS Configuration Utility 15
• Allow RAID migration. RAID migration means changing the RAID
level of the array. You can optionally add one or more drives to the
array when you change the RAID level.
The following is an example of the Properties screen.
WebBIOS Properties Screen
Boot from a Logical Drive
After you select a logical drive to boot from, the system boots from that
logical drive when you reboot. This field is 0-n, where n = the number of
logical drives created on the controller – 1. For example, it is 0-0 when there
is one logical drive on the controller. Press Go to perform the selected
action or Reset to delete any changes.