User`s guide

WebBIOS Configuration Utility 13
Initialize
You should use the Initialize option to initialize each new logical drive that
you configure. Perform the following steps to initialize a logical drive:
1 Select the Logical Drives option from the WebBIOS Main Menu
screen.
2 On the Logical Drive Definition screen, select the logical drive to be
initialized.
3 Select Initialize below the list of drives and click Go.
The progress of the initialization appears as a graph on the screen.
4 When initialization completes, click Back to display the previous
menu.
Check Consistency
Select this option to verify the correctness of the redundancy data. This
option is available only if RAID level 1, 5, 10 or 50 is selected. Check
consistency automatically corrects any differences found in the data.
After you click Check Consistency and Go, a progress chart displays on the
left side of the screen to show how much of the consistency check has been
completed. There is also an option to abort the check for any or all logical
drives.