Reference Guide

Security Management Server v10.2.7 AdminHelp

The PBA Unlock command for this endpoint group is carried out in the PBA Device Control area. This

command unlocks the PBA screen after it has been locked – either by sending a Lock command or by

exceeding the maximum number of authentications attempts allowed by policy.

Endpoint Group Members

This page lists the endpoints within an endpoint group. Information displays based on the group specification

used to create the endpoint group.

1. In the left pane, click Populations > Endpoint Groups.

2. Search or select a Group Name, then the Members tab.

Category - WINDOWS, MAC, SED, iOS, or Android

Hostname - Endpoint hostname

OS/Version - Endpoint operating system and version

Add Endpoints to an Admin-Defined Endpoint Group

1. In the left pane, click Populations > Endpoint Groups.

2. Select the group to which to add endpoints.

3. Click the Members tab.

4. Select Add Endpoints to Group, then search for specific endpoints or select endpoints in the

list, and click Add Selected Endpoints to Group.

Select Upload Multiple Endpoints from File, then click Browse to select a CSV file and click

Upload.

Valid CSV requirements:

• The file must be in valid CSV format and contain a maximum of 999 endpoints.

• The first column must contain valid fully qualified hostnames. All columns except the first

column are ignored.

• Only activated endpoints are added to the group.

Remove Endpoints from an Admin-Defined Endpoint Group

1. In the left pane, click Populations > Endpoint Groups.

2. Select the group in which to add endpoints.

3. Click the Members tab.

4. Search for specific endpoints or select endpoints in the list. To select more than one endpoint,

press Shift and select the endpoints.

5. Click the red X in the right column for each endpoint, or select the endpoints and click Remove

Endpoints from Group.

Endpoints