Dell D3218HN User’s Guide Regulatory model: D3218HNo
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2017 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws. Dell™ and the Dell logo are trademarks of Dell Inc.
Contents Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 About your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Monitor specifications . . . . . . . . . . . . . . . . . . . . . . . .
Safety instructions This monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper use or installation may result in danger to the user, damage to the monitor, or both. Use the following safety guidelines to protect your monitor from potential damage and ensure your personal safety. WARNING: This monitor should be operated only with a correct power source as indicated at the label on the rear of the monitor.
About your monitor Package contents Your monitor ships with the components shown below. Make sure that you have received all the components and contact Dell if something is missing.
Technical specifications Monitor specifications LCD Panel 80.0 cm (31.5”) TFT (with LED back light) VESA DPMS compatible Power Management Off Mode, < 0.4 W Power Saving Mode, < 0.4 W Displayable Full HD, 1920 x 1080 max. Resolution Vertical Frequency, 60Hz max. Pixel Dimension 0.36375 x 0.36375 mm Color gamut 84 % of NTSC (CIE1976) Color Depth 16.
* ComfortView feature is designed to reduce the amount of blue light emitted from the monitor to optimize eye comfort. NOTE: For information on the refresh rate (vertical frequency) of the graphics card, see the documentation that shipped with the graphics card. Power Management Modes If you have VESA’s DPM-compliant video card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as power save mode*.
Supported resolutions and refresh rates WARNING: Do not set the graphics card on your computer to exceed these maximum refresh rates. Doing so may result in permanent damage to your monitor.
Setting up the monitor Attaching the stand 2 3 1 1. Place the monitor face down on a flat and clean surface. 2. Align the screw holes on the monitor with the screw holes on the stand. 3. Replace the four screws that secure the monitor to the base. Tighten the screws firmly. Removing the stand 2 1 3 1. Place the monitor face down on a flat and clean surface. 2. Remove the four screws that secure the monitor to the stand. 3. Remove the stand.
Connecting Your Monitor 1. Connect the video cable Ensure both monitor and computer are turned off. Connect one end of the VGA or HDMI cable (optional) to the computer, and then connect the other end to the respective port on the monitor. 2. Connect the power cord Connect the power cord to a properly-grounded AC outlet, and then to the monitor. 3. Turn on the monitor Press the power button to turn on the monitor. 4.
Parts and controls Front view 1 2 3 4 56 Back view 7 8 9 1 OSD Menu On/Off 6 Power ON/OFF 2 Scroll Down/ Decrease/ Contrast/Brightness menu 7 HDMI input (HDMI 19 pin) 3 Scroll Up/ Increase/ Color Vision Mode select 8 VGA input (D-Sub 15 pin) 4 Confirm Select/ Input Select 9 Power input 5 LED Indicator Setting up the monitor 11
Using On Screen Display (OSD) Functions Your monitor’s settings are adjusted with the following buttons: Button Function Display main menu Exit from main menu Manual adjust mode select for VGA, HDMI mode Select the desired item when in OSD menu When not in OSD menu, directly enters Color Vision Mode Select the desired item when in OSD menu When not in OSD menu, directly enters Contrast/Brightness menu + Recall both Contrast and Brightness (when not in OSD menu) + Power Lock, press 10 seconds to lock, r
Menu item Description Auto Image Adjust Adjust the Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. NOTE: Only available for VGA input. Contrast/Brightness Adjust the Contrast, Brightness, DCR and ECO of screen image. • Contrast Adjust the foreground white level of screen image. • Brightness Adjust the luminance of the video. • DCR Detects the distribution of the visual signal input, and creates an optimized contrast.
• Horizontal Size Adjust the width of the screen image. ▲: increase the width of screen image, ▼: decrease the width of screen image. NOTE: Only available for VGA input. • Fine Tune Adjust the delay time of data and clock. Press ▲ or ▼ to adjust to your preference. NOTE: Only available for VGA input. • Sharpness Adjust the clarity of a non-Full HD resolution signal with ▲ or ▼ button. • Aspect Ratio Toggles the video mode between Full Screen or 4:3.
• Color Vision Mode To reduce the risk of eye strain and neck/arm/ back/shoulder pain from using the monitor for long periods of time, we suggest you to: 1. Set the distance of the screen between 20 inches to 28 inches (50cm-70cm) from your eyes. 2. Blink frequently to moisten your eyes or wet your eyes with water after prolonged usage of the monitor. 3. Take regular and frequent breaks for 20 minutes every two hours. 4.
Maintenance guidelines Care • Avoid exposing your monitor directly to sunlight or other heat source. Place your monitor away from the sun to reduce glare. • Place your monitor in a well-ventilated area. • Do not place any heavy objects on top of your monitor. • Ensure your monitor is installed in a clean and moisture-free area. • Keep your monitor away from magnets, motors, transformers, speakers, and TV sets.
Appendix Contacting Dell To contact Dell for sales, technical support, or customer service issues, see www.dell.com/contactdell. NOTE: Availability varies by country and product, and some services may not be available in your country. NOTE: If you do not have an active internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog.
