Dell D3216H User’s Guide Regulatory model: D3216Ho
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2015 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws. Dell™ and the Dell logo are trademarks of Dell Inc.
Contents Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 First Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installing the LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installing the Stand Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Disconnecting the Stand Base . . . . . . . . . . . . .
Safety Precautions This monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper use or installation may result danger to the monitor as well as to the user. Carefully go over the following WARNINGS before installation and keep this guide handy. WARNINGS • This monitor should be operated only at the correct power sources indicated on the label on the rear end of the monitor.
First Setup Congratulation for purchasing this monitor of high performance! This monitor comes with the following accessories : • LCD Monitor • Base • AC Power Cord • DVI Cable (24 pin) • Drivers and Documentation media • Quick Setup Guide • Safety and Regulatory Information Installing the LCD Monitor Installing the Stand Base 1. Place the monitor face down on a flat leveled surface. 2. Align the monitor with the opening in the base. 3.
Quick Installation 1. Connect Video cable Make sure both monitor and computer are powered OFF. Connect the video cable (DVI cable) to the computer, then to the monitor. or connect VGA cable (optional) Connect the VGA cable from VGA output of computer to the VGA input of the monitor. 2. Connect Power cord Connect the power cord to a properly grounded AC outlet, then to the monitor. 3. Power-ON computer and monitor Power-ON the computer, then Power-ON the monitor. 4.
Front/-Rear View of the Product 1 2 3 4 5 6 7 8 9 10 11 1 LED Indicator 7 Scroll Down/ Decrease/ Video Mode Adjustment 2 Power ON/OFF 8 Scroll Up/ Increase/ Picture Mode select Power input 3 Confirm Select/ Input Select 9 4 OSD Menu On/Off 10 DVI input (DVI 24 pin) 5 ECO Adjust 11 6 Contrast/Brightness Adjust VGA input (D-Sub 15 pin) First Setup 7
Using On Screen Display (OSD) Functions Display main menu Exit from OSD menu Manual adjust mode select for D-SUB, DVI mode Select the desired item when in OSD menu When not in OSD menu, directly enters Video Mode Adjustment Select the desired item when in OSD menu When not in OSD menu, directly enters Picture Mode Manual adjust Contrast or Brightness ECO Manual adjust mode select for Standard, Optimize, Conserve + Recall both of Contrast and Brightness (when not in OSD menu) + Power Lock, press 10 seco
Shortcut Function from the button(s) AUTOMATIC ADJUSTMENT To auto adjust Horizontal Position, Vertical Position, Phase (Fine Tune) and Clock (H. Size) of the screen. Note: Only available for VGA input. CONTRAST/ BRIGHTNESS To manually adjust the Contrast and Brightness of screen image. • CONTRAST To adjust the foreground white level of screen image. • BRIGHTNESS To adjust the luminance of the video. INPUT SOURCE When Input Select is pressed, change Input signal to D-SUB or DVI.
• HORIZONTAL SIZE To adjust the width of the screen image. ▲: increase the width of screen image, ▼: decrease the width of screen image. Note: Only available for VGA input. • FINE TUNE To adjust the delay time of data and clock. Press ▲ or ▼ to adjust to your preference. Note: Only available for VGA input. • SHARPNESS To adjust the clarity of a non-Full HD Resolution (1920x1080) signal with ▲ or ▼ button. • DCR To detect the distribution of the visual signals inputs, and create an optimized contrast.
MENU SETTING To set up LANGUAGE SELECT, OSD POSITION, OSD TIMEOUT and OSD BACKGROUND. • LANGUAGE SELECT To allow users to choose from available languages. • OSD POSITION Press ▲ or ▼ button to select between horizontal and vertical OSD Position adjustment. • OSD H. POSITION: To horizontally adjust the OSD position. ▲: move OSD to the right, ▼: move OSD to the left. • OSD V. POSITION: To vertically adjust the OSD position. ▲: move OSD up, ▼: move OSD down.
Supporting Timing Modes VGA 720 x 400 @ 70Hz VESA 1024 x 768 @ 60Hz VGA 640 x 480 @ 60Hz VESA 1024 x 768 @ 70Hz MAC 640 x 480 @ 67Hz VESA 1024 x 768 @ 75Hz VESA 640 x 480 @ 72Hz VESA 1280 x 720 @ 60Hz VESA 640 x 480 @ 75Hz VESA 1280 x 1024 @ 60Hz VESA 800 x 600 @ 56Hz VESA 1280 x 1024 @ 75Hz VESA 800 x 600 @ 60Hz VESA 1440 x 900 @ 60Hz VESA 800 x 600 @ 72Hz VESA 1600 x 900 @ 60Hz VESA 800 x 600 @ 75Hz VESA 1680 x 1050 @ 60Hz MAC 832 x 624 @ 75Hz VESA 1920 x 1080 @ 60Hz
Technical Information Technical Specification LCD Panel 80.0 cm (31.5”) TFT (with LED back light) Power Management VESA DPMS compatible Off Mode, < 0.5 W Displayable Resolution Full HD 1920 x 1080 max. Vertical Frequency 60Hz max. Pixel Dimension 0.36375 x 0.36375 mm LCD Display Color 16.7M Active Display Area 698.4 x 392.
Care and Maintenance Care • Avoid exposing your monitor directly to sunlight or other heat source. Place your monitor away from the sun to reduce glare. • Put your monitor in a well ventilated area. • Do not place any heavy objects on top of your monitor. • Ensure your monitor is installed in a clean and moisture-free area. • Keep your monitor away from magnets, motors, transformers, speakers, and TV sets. Note • Move the monitor out of the package and take off the plastic bag and Polystyrene Foam.
Wrong or abnormal colors • If any colors (red, green, blue) are missing, check the video cable to make sure it is securely connected. Loose or broken pins in the cable connector could cause an improper connection. • Connect the monitor to another computer.
Appendix Contacting Dell To contact Dell for sales, technical support, or customer service issues, see www.dell.com/contactdell. NOTE: Availability varies by country and product, and some services may not be available in your country. NOTE: If you do not have an active internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog.
