Dell D2719HGF User’s Guide Model: D2719HGFb Regulatory model: D2719HGFb
NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
Contents About your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Identifying parts and controls . . . . . . . . . . . . . . . . . . . . . . 7 Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Back view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Bottom view . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 FCC notices (U.S. only) and other regulatory information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Contact Dell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About your monitor Package contents Your monitor ships with the components shown in the table below. If any component is missing, contact Dell technical support. For more information, see Contact Dell. NOTE: Some items may be optional and may not ship with your monitor. Some features may not be available in certain countries. NOTE: If you are attaching a stand that you purchased from any other source, follow the set up instructions that were included with the stand.
HDMI cable USB 2.
Identifying parts and controls Front view Front panel controls Label Description 1 Function buttons (For more information, see Operating the monitor) 2 Power On/Off button (with LED indicator) About your monitor │ 7
Back view Label Description Use 1 VESA mounting holes (100 mm x 100 mm - behind attached VESA cover) Wall mount monitor using VESAcompatible wall mount kit (100 mm x 100 mm). Stand release screw Releases the stand column from the monitor. Regulatory label, barcode, serial number, and Service Tag label The label lists the regulatory approvals and technical support information. Security lock slot Secures monitor with security lock (security lock not included).
Bottom view Bottom view without monitor stand Label 1 2 3 4 Description Power connector Connect the power cable (shipped with your monitor). Headphone connector Connect your headphones. HDMI port Connect your computer with HDMI cable (shipped with your monitor). DisplayPort Connect your computer with DisplayPort cable (cable not included). USB upstream port Connect the USB cable (shipped with your monitor) to this port and your computer to enable the USB ports on your monitor.
Monitor specifications Model D2719HGF Viewable image size (diagonal) 68.565 cm (27 inches) Active display area Horizontal 597.6 mm (23.5 inches) Vertical 336.15 mm (13.2 inches) Maximum resolution 1920 x 1080 at 144 Hz Aspect ratio 16:9 Pixel pitch 0.31125 x 0.31125 mm Brightness 400 cd/m² (typical) Color gamut 72% (CIE 1931), 88% (CIE 1976) Color depth 16.
Features Stand Tilt (-3.5° to 21.5°) Security Security lock slot (cable lock sold separately) Flicker-free screen and ComfortView (low-blue light) N/A VESA mounting support (wall mount sold separately) VESA 100 mm x 100 mm Audio headphone-out Yes Speaker 2Wx2 Freesync Yes (40 Hz to 144 Hz) PVC/BFR/CFR-reduced No Power AC input (voltage) AC (90 - 264 V) Power consumption (normal operation) 50 W (maximum) Power consumption (active-off mode) < 0.5 W Dimensions (with stand) Height 44.
Display modes Display mode Horizontal frequency (kHz) Vertical frequency (Hz) Pixel clock (MHz) Sync polarity (horizontal/ vertical) 640 x 480 31.47 59.94 25.175 -/- 640 x 480 37.5 75 31.5 -/- 720 x 400 31.47 70.08 28.321 -/+ 800 x 600 37.88 60.32 40 +/+ 800 x 600 46.88 75 49.5 +/+ 832 x 624 49.72 74.55 57.283 -/- 1024 x 768 48.36 60 65 -/- 1024 x 768 60.02 75.03 78.75 +/+ 1024 x 768 60.24 74.93 80 -/- 1152 x 720 44.86 60 66.75 -/+ 1152 x 870 68.
1920 x 1080-R 83.89 74.97 174.5 +/- 1920 x 1080 113.221 99.93 235.5 +/- 1920 x 1080 137.26 119.982 285.5 +/- 1920 x 1080 166.587 143.981 346.5 +/- NOTE: This monitor supports AMD FreeSync. Power management modes If you have VESA's DPM™ compliance display card or software installed on your computer, the monitor can automatically reduce its power consumption when not in use. This is referred to as Power Save Mode*.
Maintenance guidelines Cleaning your monitor CAUTION: Read and follow the Safety instructions before cleaning the monitor. WARNING: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. For best practices, follow the instructions in the list below when unpacking, cleaning, or handling your monitor: • To clean your anti-static screen, lightly dampen a soft, clean cloth with water.
Setting up the monitor Attaching the stand NOTE: The stand is not installed at the factory when shipped. NOTE: To prevent scratches on the LCD screen when removing the stand, ensure that the monitor is placed on a soft, clean surface. NOTE: The following instructions are applicable only for attaching the stand that was shipped with your monitor. If you are attaching a stand that you purchased from any other source, follow the set up instructions that were included with the stand. 1.
4. Tighten the screw on the monitor to ensure a secure attachment. 5. Place the monitor upright. Connecting your monitor WARNING: Before you begin any of the procedures in this section, follow the Safety instructions. NOTE: Do not connect all cables to the computer at the same time. To connect your monitor to the computer: 1. Turn off your computer and disconnect the power cable. 2. Connect the HDMI or DisplayPort cable from your monitor to the computer.
Connecting the DisplayPort (DisplayPort to DisplayPort) cable (optional) NOTE: The graphics are used for the purpose of illustration only. Appearance of the computer may vary. Connecting the USB 2.0 cable After you have completed connecting the HDMI or DisplayPort cable, follow the procedures below to connect the USB 2.0 cable to the computer and complete your monitor setup: 1. Connect the upstream USB 2.0 port (cable supplied) to an appropriate USB port on your computer. (See Bottom view for details.) 2.
Setting the maximum resolution To set the maximum resolution for the monitor: In Windows® 7, Windows® 8, and Windows® 8.1: 1. For Windows® 8 and Windows® 8.1 only, select the Desktop tile to switch to classic desktop. 2. Right-click on the desktop and click Screen Resolution. 3. Click the dropdown list of the Screen Resolution and select 1920 x 1080. 4. Click OK. In Windows® 10: 1. Right-click on the desktop and click Display settings. 2. Click Advanced display settings. 3.
Removing the monitor stand NOTE: To prevent scratches on the LCD screen when removing the stand, ensure that the monitor is placed on a soft, clean surface. NOTE: The following instructions are applicable only for attaching the stand that was shipped with your monitor. If you are attaching a stand that you purchased from any other source, follow the set up instructions that were included with the stand. To remove the stand: 1. Place the monitor on a soft cloth or cushion. 2.
Operating the monitor Using the front-panel controls Use the control buttons on the front of the monitor to adjust settings. The following table describes the front-panel buttons: Front-panel button Description 1 Use the INPUT button to select a video signal. 2 • Exit from the OSD menu. • Hotkey for i-Style Color 3 • For Up/Left/Decrease adjustment. • Hotkey for ECO Mode. 4 • For Down/Right/Increase adjustment. • Hotkey for Volume.
Using the On-Screen Display (OSD) menu Use the Icon button to display the main menu. Menu and submenu Descriptions Picture Adjust Use the menu to adjust the picture settings. • Contrast Adjusts the degree of difference between darkness and lightness on the monitor screen. • Brightness Adjusts the luminance of the backlight. • Overdrive Improves the gray level response time of the LCD panel. 2 levels are provided, and +2 offers faster gray-to-gray response time. • Adv.
Input Select Use the directional buttons to change the video signal to HDMI or DisplayPort. Selecting Auto allows you to automatically scan for available input sources. Audio Adjust Use the menu to adjust the audio settings. • Volume Adjusts the audio volume. • Mute Allows you to mute the audio input by selecting On. Color Adjust Use the menu to adjust the color settings. NOTE: When i-Style Color is activated, other color adjustments under this menu are disabled.
Language Sets the OSD menu language. Setup Use the menu to adjust the OSD settings. • OSD Position Use H. Position and V. Position to adjust the horizontal and vertical position of the OSD menu. • OSD Time Out Adjusts the display time of the OSD menu. • Auto Power-Off If you select On, the monitor automatically powers off after 3 hours of inactivity. • FreeSync Sets FreeSync to On or Off. Display Information Displays the monitor's current settings.
Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety instructions. The following table contains general information about common monitor problems you might encounter and the possible solutions: Common symptoms No Video/Power LED off What you experience No picture Possible solutions • Ensure that the video cable connecting the monitor and the computer is properly connected and secure.
Stuck-on Pixels LCD screen has bright spots • Cycle power On-Off. • Pixel that is permanently off is a natural defect that can occur in LCD technology. • For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: http:// www.dell.com/support/monitors. Brightness Problems Picture too dim or too bright • Reset the monitor to factory settings. Safety Related Issues Visible signs of smoke or sparks • Do not perform any troubleshooting steps.
Image retention from a static image left on the monitor for a long period of time Faint shadow from the static image displayed appears on the screen • Use the Power Management feature to turn off the monitor at all times when not in use (for more information, see Power management modes). Screen image is too small Image is centered on screen, but does not fill entire viewing area • Check the Video Mode Adjust setting in the Image Adjust menu OSD.
Appendix WARNING: Safety instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Safety, Environmental, and Regulatory Information (SERI). FCC notices (U.S. only) and other regulatory information For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.
