Owner's Manual

Dell ControlPoint Connection Manager 91
• Check Auto Promote if you choose to enable DCP Connection Manager
to automatically connect to the next available Location Profile if the
current
network connection is lost.
2 Click OK to return to the Global Program and Network Settings screen.
Figure 1-45. Location Settings Screen
Radio Hardware Switch Settings
The Radio Hardware Switch is located on the side or front of your laptop.
From this screen you can associate Wi-Fi, Bluetooth, mobile broadband, and
other wireless radio technologies and other settings, such as the Wi-Fi Catcher
Network Locator feature, to be enabled/disabled from the Radio Hardware
Switch located on your Dell laptop.
NOTE: The Radio Hardware Switch feature may not be available on certain Dell
laptops.
1 Open DCP Connection Manager → Profiles → Change
Settings
→ Hardware Switch .
2 Select the appropriate check boxes and click OK to return to the Global
Program and Network Settings
screen.
A5_bk0.book Page 91 Wednesday, January 28, 2009 12:42 PM