Owner's Manual

86 Dell ControlPoint Connection Manager
To access Program Settings, open DCP Connection
Manager
→Profiles→Change Settings→Program Settings. The Program
Settings screen appears.
The check boxes and fields on this screen allow you to:
• Set System Tray options
•From
Available technologies , select the network connection types to be
recognized and managed by the DCP Connection Manager.
• Disable the Wi-Fi or Mobile broadband technology whenever an Ethernet
(wired) connection is established.
• Configure a default VPN profile that is superseded only by VPN profiles
associated with Location Profiles.
To configure a default VPN profile:
1
Click the VPN Client drop-down list box to select your VPN client. The
Profile drop-down list box appears. The following VPN clients are
supported:
• Check Point
• Cisco Systems
• Microsoft
• Nortel Networks
NOTE: If your VPN client is not listed, you can map to a VPN client application
(.exe) installed on your Dell laptop by selecting Extended from the VPN Client drop-
down list. See "Extended VPN Support" for more information.
2 Click the Profile drop-down list box to select the appropriate VPN Profile.
Alternatively, you can click
Add to create a new VPN Profile.
NOTE: Consult the IT administrator that supports your VPN service for details
on configuring a new VPN profile.
3 Complete the required fields and click OK to return to the Profile Wizard
Settings
screen (see Figure 1-40).
4 Check Enforce VPN to enforce VPN security on all network connection s
with VPN profiles associated with Location Profiles or with
network
connection
s without Location Profile attachment with the Use VPN
Connection option
selected.
A5_bk0.book Page 86 Wednesday, January 28, 2009 12:42 PM