Owner's Manual
62 Dell ControlPoint Connection Manager
NOTE: Use to connect to a Cisco Compatible Extensions v4 network. If you
are connecting to a Cisco Compatible Extensions v3 network, you must use
the EAP-FAST/NONE method.
–
EAP-FAST/GTC
—EAP-FAST EAP authentication with GTC inner
authentication; requires a user name and password or token. Cisco
Compatible Extensions v4 authenticated provisioning is used.
NOTE: Use EAP-FAST/GTC to connect to a Cisco Compatible Extensions v4
network. If you are connecting to a Cisco Compatible Extensions v3 network,
you must use the EAP-FAST/NONE method. EAP is a universal authentication
framework frequently used in wireless networks.
WPA/WPA2 - Enterprise Authentication
The network is operating in 802.1X authentication mode. This mode is for
environments with a Remote Access Dial-In User Service (RADIUS)
infrastructure. This environment requires advanced technical support to set up
and maintain and is intended for use by large organizations.
WPA-Enterprise security uses either WPA or WPA2 security protocols based on
the WPA/WPA2 security protocols available on the AP.
• The encryption method may be
TKIP (WPA)
or
AES (WPA2)
.
• The authentication method may be one of the following EAP (Extensible
Authentication Protocol) methods:
–
TLS
—TLS EAP authentication with no inner authentication. Requires a
client certificate.
–
TTLS/PAP
—TTLS EAP authentication with PAP inner authentication.
Requires username and password.
–
TTLS/CHAP
—TTLS EAP authentication with CHAP inner
authentication. Requires username and password.
–
TTLS/MSCHAP
—TTLS EAP authentication with MS-CHAP inner
authentication. Requires username and password.
–
TTLS/MSCHAPv2
—TTLS EAP authentication with MS-CHAPv2
inner authentication. Requires username and password.
–
LEAP
—LEAP EAP authentication with no inner authentication.
Requires username and password.
–
PEAP/MSCHAPv2
—PEAP authentication with MS-CHAPv2 inner
authentication. Requires username and password.
A5_bk0.book Page 62 Wednesday, January 28, 2009 12:42 PM