Owner's Manual

52 Dell ControlPoint Connection Manager
7 From the Connection tab, check the Use anonymous outer identity box to
prevent clear text transmission of username and password information.
8 If using Automatic PAC Provisioning, check the Validate server certificate
box. Then, select the certificate authority associated with the security
certificate installed on your laptop.
Alternatively, you can check the
Available Manual PAC radio button and
click the
Add button to manually install a PAC file.
9 Click Enable Fast Reconnect to allow limited re-authentication when
roaming between Wi-Fi access points.
NOTE: This setting is available only with Cisco Wi-Fi access points
configured with Cisco's Wireless Domain Services (WDS).
10 Click the User Credentials tab to continue (see Figure 1-22).
11 Select one of the available User Credential options.
12 Click OK to return to the Advanced Wi-Fi screen.
13 Click OK to finish configuring advanced Wi-Fi settings and return to the
Profile Wizard Settings screen.
14 Click Next to continue the Profile Wizard , or click Finish to reach the
Profile Wizard Summary page.
Configure 802.1x, WPA-Enterprise, WPA2-Enterprise, or CCKM Client with EAP-
FAST EAP and No Inner EAP Authentication
1 Open DCP Connection Manager → Profiles → Add . Check the Wi-Fi
check box, and then click
Next . The Profile Wizard Settings screen for
Wi-Fi appears (see Figure 1-19).
2 In the Connection Name field, type a name to associate with this network
connection
.
3 Click the View button to scan a list of broadcasting networks for a Wi-Fi
network to add. Click on a Wi-Fi network and then click
OK to return to the
previous screen. DCP Connection Manager automatically populates the
required fields.
If the scan result does not show the Wi-Fi network you are searching for, then
manually enter the following required information:
–
Network Name: Type the name of the Access Point (AP), often called
an SSID, to which you will be connecting.
A5_bk0.book Page 52 Wednesday, January 28, 2009 12:42 PM